This is a helpful guide for installing a replacement window flyscreen. Remember to always check with Foundation Housing if you are unsure if something is your responsibility.
Step 1 - Purchase the frame
Purchase the frame (aluminium or vinyl) if needed, screen and rubber spline (piping) if needed. You will also need to buy or borrow tools to complete the task.
Step 2 - Remove the frame
Remove this from the trench that surrounds the screen, using a screwdriver all the way around.
Step 3 - Clean
Use a paint brush to clean the trench once the spline is removed.
Step 4 - Lay the screen
Lay the screen over the frame. Leave approx. 50mm overhang of the area to be screened.
Step 5 - Indent the screen
Carefully use the spline-roller to indent the screen.
- Indent the screen into the trench, making sure not to puncture, wrinkle or pull the screen out of shape.
- It will take 4 to 5 passes around before the screen before it is securely indented.
Step 6 - Lay it on
Take your spline, and gently lay it into the trench.
Step 7 - Secure it
Take the spline-roller and gently press the piping into the trench. This will take 2 to 3 passes to ensure it is properly secured.
Step 8 - Trim
If the screen sets to your satisfaction, carefully trim the excess screen with a utility knife.
Step 9 - Re-install
Now you are ready to re-install your repaired frame and screen into place.
Downloads
- How to Install a Replacement Window Screen (405 KB, pdf)
WANDJOO MIA - 'Welcome Home' by Anthea Corbett
Foundation Housing acknowledges the Traditional Custodians of the Country on which we work and live and recognises their continuing connection to land, waters and community. In particular, the Whadjuk people of the Noongar nation in Perth, the Yawuru people in Broome and the Kariyarra people in South Hedland. We pay our respect to them and their cultures and to Elders past, present and emerging.
Copyright Foundation Housing 2025 All rights reserved